ALT110 system of office partition walls has a number of unique features and characteristics:

1. the partition wall is assembled using steel angles with self-tapping screws without preliminary drilling of the profiles (fig.1):

• use of steel angles enables the installation of transoms even if the posts are already installed without step-by-step installation;
• grooves in the angles provide setting the contour line of transom without the necessity to drill new holes in the post;
• with the help of the angles the post can be fastened to the floor or the ceiling;
• use of steel angles helps to conceal installer faults during cutting of transom up to 5 cm;
• steel angles have an opening for the shutters rope.

2. filling is fixed with locking clamps;

3. it is possible to use single or double transparent and non-transparent filling (fig. 2):

• glass with 4, 5, 6 and 8 mm thickness;
• gypsum plasterboard, flake board, MDF, and any other materials from 4 to 16 mm thickness.

4. it is possible to install shutters of various types with thickness from 16 to 26 mm (fig. 3);

5. turning profiles enable rotation angles of the constructions from 90° to 270° (fig. 4);

6. it is possible to install single- and double-leaf doors with single or double filling.