Key features of ALUTECH ALT150 system

Professional engineer documentation

The catalogue of technical solutions contains the entire list of units and fittings that can be realized by ALUTECH ALT150 system. According to the expert report by the specialists of Melnikov Central R&D Institute of Construction Material Structures “the section in the catalogue of technical solutions dedicated to the calculation of a façade system can be acknowledged as an etalon procedure for ventilated cladding systems”.

Optimal rigidity properties

ALUTECH ALT150 system is divided into subsystems due to application of several types of guiding profiles

• Subsystem based on AYPC.150.0101 complex section guiding profile belongs to a general purpose type. The required rigidity and strength of AYPC.150.0101 guiding profile has been perfectly calculated to prevent reduction of support step under heavy loads and prevent the increase of substructure’s cost, as well as investing in its rigidity more than it is necessary. The calculations allow its usage at the height up to 150 m (in a V-wind region). The subsystem enables using various finishing types and fixation means.
• ALUTECH ALT150 system with AYPC.150.0102 guiding profile is designed for paneling small buildings with ceramic granite and similar materials. A simple T-section guide is considered the lightest structure but does not possess the required rigidity. The use of this guide is possible for buildings of small height exposed to low loads. It stands out of other systems for a broader adjustment range.
• ALUTECH ALT150 system with AYPC.150.0103 and AYPC.150.0104 guiding profiles is designed for paneling buildings with fiber-cement plates or other flat materials. Fixing peculiarities of fiber-cement plates require the application of several guides – to fix plates at the joint and for the intermediate fixation.